High Precision and Sensitivity Bovine Non-esterified Fatty Acid ELISA Assay Kit For Research

Cat.No E0021Bo

Reagent Provided

Material Required But Not Supplied

• 37°C±0.5°C incubator
• Absorbent paper
• Precision pipettes and disposable pipette tips
• Clean tubes
• Deionized or distilled water
• Microplate reader with 450 ± 10nm wavelength filter

Standard Curve Range: 2μmol/L - 600μmol/L

Sensitivity: 1.17μmol/L

Storage: Store the reagents at 2-8°C. For over 6-month storage refer to the expiration date keep it at -20°C. Avoid repeated thaw cycles. If individual reagents are opened it is recommended that the kit be used within 1 month.

*This product is for research use only, not for use in diagnosis procedures. It’s highly recommend to read this instruction entirely before use.

Intended Use

This sandwich kit is for the accurate quantitative detection of Bovine Non-esterified Fatty Acid (also known as NEFA) in serum, plasma, cell culture supernates, cell lysates, tissue homogenates.

Assay Principle

This ELISA Assay Kit is an Enzyme-Linked Immunosorbent Assay (ELISA). The plate has been pre-coated with Bovine NEFA antibody. NEFA present in the sample is added and binds to antibodies coated on the wells. And then biotinylated Bovine NEFA Antibody is added and binds to NEFA in the sample. Then Streptavidin-HRP is added and binds to the Biotinylated NEFA antibody. After incubation unbound Streptavidin-HRP is washed away during a washing step. Substrate solution is then added and color develops in proportion to the amount of Bovine NEFA. The reaction is terminated by addition of acidic stop solution and absorbance is measured at 450 nm.

Precautions

• Prior to use, the ELISA Assay Kit and sample should be warmed naturally to room temperature 30 minutes.
• This instruction must be strictly followed in the experiment.
• Once the desired number of strips has been removed, immediately reseal the bag to protect the remain from deterioration. Cover all reagents when not in use.
• Make sure pipetting order and rate of addition from well-to-well when pipetting reagents.
• Pipette tips and plate sealer in hand should be clean and disposable to avoid cross-contamination.
• Avoid using the reagents from different batches together.
• Substrate solution B is sensitive to light, don’t expose substrate solution B to light for a long time.
• Stop solution contains acid. Please wear eye, hand and skin protection when using this material. Avoid contact of skin or mucous membranes with kit reagent.
• The kit should not be used beyond the expiration date.

Reagent Preparation

All reagents should be brought to room temperature before use.

Standard Reconstitute the 120μl of the standard (640μmol/L) with 120μl of standard diluent to generate a 320μmol/L standard stock solution. Allow the standard to sit for 15 mins with gentle agitation prior to making dilutions. Prepare duplicate standard points by serially diluting the standard stock solution (320μmol/L) 1:2 with standard diluent to produce 160μmol/L, 80μmol/L, 40μmol/L and 20μmol/L solutions. Standard diluent serves as the zero standard(0 μmol/L). Any remaining solution should be frozen at -20°C and used within one month. Dilution of standard solutions suggested are as follows:

Wash Buffer Dilute 20ml of Wash Buffer Concentrate 30x into deionized or distilled water to yield 600 ml of 1x Wash Buffer. If crystals have formed in the concentrate, mix gently until the crystals have completely dissolved.

Summary

1. Prepare all reagents, samples and standards.

2. Add sample and ELISA reagent into each well. Incubate for 1 hour at 37°C.

3. Wash the plate 5 times.

4. Add substrate solution A and B. Incubate for 10 minutes at 37°C.

5. Add stop solution and color develops.

6. Read the OD value within 10 minutes.

Calculation of Result

Construct a standard curve by plotting the average OD for each standard on the vertical (Y) axis against the concentration on the horizontal (X) axis and draw a best fit curve through the points on the graph. These calculations can be best performed with computer-based curve-fitting software and the best fit line can be determined by regression analysis.

Shanghai Korain Biotech Co. was built in 2010. As an creator in reagents and tools for life science, Korainbio provide researchers with tools and scientific support including 30,000 antibodies, 1000+ proteins and 5000 ELISA kits. We aim to be a leading provider with world-class level for the researchers all over the world. Our products line covers a set of research areas including Immunology, Neuroscience, Cancer, Kinases, Phosphatases and Cell Biology.

Bioassay Technology Laboratory (BT Lab) as a leading brand of Korainbio focused on helping researchers to optimize life science work and serves as a provider of test and developing services, including elisa tests, WB test and antigen development. Founding in 2010, our strategic focus has been on the development of enabling technologies in the research, development, manufacture and marketing of innovative immuno products and services based on molecular technologies.

Korain’s reagents are supported by superior processional team and a quality management system that is certified for CE and ISO. Our product development program for use in a variety of applications including:

ELISA and immunohistochemistry

• Immunoprecipitation
• Immunohistochemistry
• Immunofluorescence microscopy
• Immunohistochemistry
• Quantitative Multiplexing

About BT Lab

As a leading brand of Korainbio, Bioassay Technology Laboratory (BT Lab) offers a variety of cost-effective ELISA kits and sets to measure cytokines, chemokines, and soluble biomarkers consistently and reliably. Sandwich kit and Competitive that provide the core reagents our selection of ELISA products meets the demand of ELISA beginners to experts alike at a very economical price.

Worldwide Distributors

ELISA Kit Categories

Sandwich Kit
Sandwich kits are fully validated and ready-to-use, containing 96- well strip plates pre-coated with capture antibody to detect sample antigen.

Competitive Kit
In a competitive ELISA assay, sample antigen and labeled antigen compete for capture antibody binding. The more target protein there is in the sample, the less labeled antigen will be captured and the weaker the signal.

Qualitative Kit
Qualitative results provide a simple positive or negative result for a sample. In quantitative ELISA, the optical density (OD) of the sample is compared to a standard curve, which is typically a serial dilution of a known-concentration solution of the target molecule. It is suitable for detecting small antigens.

Advantages of our Sandwich kit

Without Diluting Sample

• Save assay time
• Wide detection range
• Reducing non-specific interactions between the sample matrix proteins

Streptavidin-biotin system

• Significant non-specific binding can be prevented by strepvidin
• Reducing interference from residual biotin in sample
• A non-covalent interaction with high affinity

Washing Step

• Only 5 times for one step

Pre-Coated plate

What We Provide

• Product datasheet, product image, MSDS, publican references
• Order by emailor phone.
• Quality Guarantee with ISO and CE certificate
• Within 36 hours to your inquiry
• Support by professional team who are specializes in life science.
• Delivery to more than 100 countries
• Special packaging according your request

What We Aim to

• Optimize your R&D with our tools
• Build a friendship with every single customer
• Devoted ourselves to providing researchers with professional support

If you’re interested in working with us to expand the market, please feel free to contact us by: save@bt-laboratory.com